Water Damage Atlanta

Restoration After Water Damage in Atlanta

What Is Water Damage Restoration?

Water damage restoration is a process designed to repair damage to a property and return it to its condition prior to being damaged by water. The damage could result from a flood, hurricane, overflow, or a broken water line. The process of restoration will involve several vital components that will include an assessment of loss, a categorization of your damage on the basis of contamination levels in the damaging water, drying and decontaminating the premises, process monitoring, and process completion. The two main organizations that certify water restoration companies are the IICRC and the RIA both of which recommend standards with regard to restoration from water damage. They have compiled a guided call the S500 guide which is a tool that is used by restoration companies that is a benchmark for the industry.

Contractors, such as Tidal Wave Response, that specialize in restoration from water damage in Atlanta have knowledge and experience in responding to emergencies and in recovery from disasters. When a problem occurs, whether it is a basement flood, roof leak, or other type of damage, call a flood damage contractor immediately for a complete restoration of your residence or commercial space. A lot of restoration contractors have an emergency response team to support their local community in the event of a disaster. The water damage technicians are frequently certified by the IICRC and have experience in handling water damage disasters for residential and commercial sites.

Most water damage restoration contractors, such as Tidal Wave Response, will be on the scene of your emergency within one hour. Time is a critical factor and rapid attention to your problems will decrease the cost and length of the restoration. Water damage experts will come to the scene of your disaster prepared to quickly assess your water damage and start the restoration process immediately. They have trucks that are fully equipped with all the gear needed to begin a water restoration project. They will be equipped with professional drying and extracting equipment that is industrial strength and designed for all types of water damage restoration efforts. They can furnish you with competent, personalized, and dependable service for a wide array of recovery scenarios.

Your Water Damage Atlanta restoration contractor will normally help you to completely repair and rebuild your office or home subsequent to a natural or man made disaster. Water restoration will involve prevention of flood loss, removal of water, and drying. Water damage restoration contractors will have knowledge and experience with loss containment efforts. There are many items, such as clothing, books, electronics, furniture, and artwork that may be salvageable in facilities that specialize in restoration and the recovery of personal items from flood damage. In addition, your restoration contractor will be able to store salvaged items temporarily until the completion of your restoration job.

Quite often, water restoration services will also involve mold remediation if a portion of the site is left untreated for more than a couple of days. Mold remediation is often a critical part of the restoration project, since the large amount of moist areas at your site will promote mold growth. In addition, your water damage restoration contractor can assist you with filing insurance claims if you have flood damage protection.

Here are the steps that are normally taken for any water damage restoration job:

Assessment Of Loss And Categorization

The initial and perhaps most critical step in a restoration from water damage is the loss evaluation. This assessment must be thorough so that a suitable response can be crafted. In the restoration of damage due to water, restoration technicians and the insurance carrier, if one exists, must respond in tandem to comprehend the extent of the damage and the methods that will be used in restoration. Identification of the damage source, documenting damage, and an accurate estimation of damage are crucial for a suitable restoration to occur.

Categorizing the damage will occur based upon the levels of contamination in the source of water. The categories are as follows:

  • Category 1 – Damage has resulted from water that has come from clean sources such as pipes and sinks
  • Category 2 – Damage has resulted from water that has some level of contaminants in it such as from a washing machine, toilet with urine, or dishwasher
  • Category 3 – Damage has resulted from water that is very unsanitary and likely to cause illness. This will be water from sewers, toilets with feces, and floodwater with microbial growth.

Drying And Decontamination

Subsequent to the completion of the evaluation, the decontamination and drying processes will commence. On the basis of the amount of damage that has occurred, damage caused by water will fall into one of four classes.

  • Class 1 – Loss is contained in a relatively small area and slow evaporation is occurring
  • Class 2 –  Damage has occurred in a whole room and carpet is soaked
  • Class 3 –  The entire area in a room is completely saturated
  • Class 4  – Numerous pockets that are totally saturated

Drying and decontamination is a critical step in the restoration process and equipment like dehumidifiers, blowers, sub floor drying gear, and scrubbers must be used. If any type of contamination has been detected then decontamination must be performed. Decontamination may have to be done for the whole area or for particular pockets where the contaminants have been detected.

Completion And Monitoring

Careful monitoring of the restoration process is necessary to reach the goals of the restoration. During the monitoring process, proactive steps must be taken to determine if everything is proceeding as planned. Making sure that equipment is properly setup and configured, making sure qualified technicians are on hand, and ensuring that all equipment is functioning properly are all included in the monitoring process. Steps are taken to resolve any problems that are occurring during the process. The process will be completed when the humidity and moisture content of the affected area is in compliance with industry standards.

Leave a comment