5 Steps to Remove Mold from Your Home

5 Steps to Remove Mold from Your Home

Do you know how to remove mold from your home?  Many homeowners don’t.  Unfortunately, hundreds of thousands of homes in America are plagued by mold (ugh!) yet too few people know the ins and outs of mold removal.

Knowing how to remove mold from your home requires an understanding of what mold is, how it survives and what types of conditions it thrives in.  That way, you’ll know where to look for it, how to remove it and how to prevent it from growing back later. After all, removing mold is only half the battle.  The most important part of mold removal is learning how to prevent more mold from coming back.

How to Remove Mold from Your Home in Five Steps

If you have a mold problem (or are just looking to prevent one) here are five things you may want to do.

Step 1:  Find the mold

Unless you happen to stumble upon it, you may want to do a quick mold check around your house.  Most often, mold tends to grow in the basement, bathrooms and other damp areas where moisture happens to collect.

Tiles, cabinets and even surfaces like wood and drywall are all common places for mold to grow.  Because mold is most “healthy” when it is left alone to grow, we usually find it thriving in cracks and crevices throughout our homes.

Step 2:  Gather your tools

While there are plenty of products claiming to be the best mold removal tool, bleach is usually the most effective thing you can buy.  It’s going to take some elbow grease, but you’ll have no problem using bleach and a scrub brush to remove all of the mold in your home.

Make a mixture of 1/4 bleach with 3/4 water, grab some rubber gloves and wear safety glasses if you have them.  Remember, it is dangerous to use bleach without proper ventilation, so make sure that you open your windows or place a fan nearby to help you keep the air circulating.

Step 3:  Prep the surface and start scrubbing

Before you start cleaning, you’ll want to make sure that bleach only touches the areas affected by mold.  You don’t want to stain your hardwood floors, your furniture or any other sensitive surface in your home.  Lay some plastic down in order to protect these areas.

Once your tools are gathered and the area is prepped, you can start cleaning.  In certain circumstances, you may find that the mold is too built-up to remove with just one swipe of the scrub brush.  For instance, if the mold has seeped deep into a surface, you should apply bleach and let it sit for a minute or two before you start scrubbing.

Step 4:  Finish it off

After you’ve scrubbed and let the surfaces dry, you’ll want to do everything you can to make sure that the mold doesn’t come back.  Of course, mold is something that is very difficult to kill entirely, but you might as well give it your best shot.  You may consider painting over a surface with sealant to ensure that the mold is killed off and stains are covered up.

It is also recommended that you invest in a dehumidifier if you don’t already have one.  Pulling the humidity out of the air is one of the best ways to suffocate any leftover spores to prevent mold from showing up again in the future.

Step 5:  Consider calling a professional

Mold removal is hard work.  If you aren’t able to take care of it on your own or just want to make sure the job is done as best as possible, you might want to hire a mold removal expert like Tidal Wave Response.

Our professional specialists will know how to remove mold from your home without a problem and help you prevent this problem from coming back.

Leave a comment